This looks like an easy diy for the home. Gotta try this out~!
DIY Fabric Wrapped Vintage Lampshade:
1. First, I laid out my supplies: permanent quick drying fabric glue, scissors, 3/4 meter of Liberty fabric, vintage lampshade won on eBay for under $5!
2. Then I stripped the lampshade removing the ugly brown polyester cover with that sexy dark brown fringe (not!). That went into the rubbish bin where it belonged!
3. Next, I wiped the frame with a rag to remove dust — important to use a dry rag as you’ll have to wait for it to dry before wrapping it with fabric otherwise.
4. Then, I laid out the fabric that I wanted to use, in this case a Liberty print that I’ve had for a few months now, and snipped into it about one inch in from the edge. After the snippet was made, I tore the fabric to the very end to create a long strip. Don’t worry about the frayed edges, they add to the charm once the frame is wrapped plus you don’t really see them in the end anyway. I cut about 6 strips to begin with, each about 46″ long, to get started. In the end, I used about 3/4 of a meter of fabric for the entire lamp.
5. I started wrapping! This was quite easy. To start, I worked from the top of the frame down. I found that easiest because if you work from the top up you risk unraveling it before it has time to “set”. When you wrap, you can either tie in a tiny knot and wrap from them, carefully concealing the knot when you wrap OR you can opt to not tie it and simply use strong instant-dry fabric glue and then fold and glue the fabric onto itself, hold in place as you wrap, and then you can eventually let go and it stays in place. You can also iron heat bond to the opposite side of fabric, iron it on, and then cut strips of fabric and wrap that way as I imagine that would be a good option as well.
TIPS: My goal is to buy a wooden lampbase that has a great silhouette and spray paint it high gloss gray or white and top it with my new “old” lampshade. If you really want to deck out your shade, add birds, ribbons, frayed bits of fabrics tied, a disco ball if you do not plan to use it as a light but as a quirky display, etc. You can even remove the center of the frame and with a ceiling mount kit (from IKEA for instance) you can turn this shade into a pendant light. Another idea is that you can hang it and wrap fairy lights in the inside to illuminate it at night. The goal is to have fun and personalize this frame – do what makes you happy!
Warning: Please be careful that you don’t use anything close to the bulb that is flammable if you plan to use the shade on a lamp base – so avoid tissue paper flowers and anything else that could start to slowly cook, and then burn, from the heat
via decor8
